schwing concrete pump placing boom
| Packaging: | schwing concrete pump placing boom :special exporting packing |
|---|---|
| Place of Origin: | Hebei, China (Mainland) |
Basic Info
Model No.: HGY18,HGY21,HGY 24,HGY28,HG28 HG32
Product Description
schwing concrete pump placing boom
Technical Information
DYFT range of Placing Booms come in 4 different sizes :
BS20-20meters 3 section with5 “ line
BS24-24meters 3 section with 5”line
BS28-28meter 4 section with 5” line
BS32-32meter 4 section with 5” line
All placing booms come complete with electric motor and power pack , counter weight , pipline safety rails and ladders and the appropriate fixing kit .
Model | HG28 | |
Concrete conveying tube specification(Outer Dia.×Tube THK) | Φ133×4mm | |
tube specification(Inner Dia.×L) | 5"×3000mm | |
Distributing radius | 27.7m | |
Unattached height(to arm hinge point) | 22.7m | |
Three-jib HYDRAULIC folding type | 1st section | 10.5m |
2st section | 9.2m | |
3st section | 8m | |
Boom working angle | 1st section | -4.2°+82.5° |
2st section | 0°180° | |
3st section | 0°180° | |
Rotating scope | 360° | |
Motor power | 11KW | |
Hydraulic system pressure | 28Mpa | |
Hydraulic oil spec | ESSO NUTO H46 | |
Min climbing frame interval | Climbing | 3m |
Placing concrete | ||
Resting | 6m | |
Operation Mode | 1.cable remote control 2.radio remote control | |
Power | 380V/50Hz | |
2.Concrete Pump Clamp coupling
1.product kinds: hingh pressure and middle pressure, we also have bolt clamp or snap clamp.
2.It is convenient to use, easy operation,bimanualness and high safety.
3.It is good sealing,wear-resising,longer service life.
4.Clamp does not restrict the steering tubes, pipes during the working process can be 360 degrees rotation.
1.material:20steel,45Mn2,st52,37Mn5
2. brand:SCHWING,KYOKUTO,SANY,PM
3.average life:20000cube--35000cube
1.Our hoses be able to use 20,000 cubic meter compared with normal quality of 12,000-15,000 cubic meters in china
2.integrated hose end and inner wall hardened, prolong working life
3.plies of steel wire reinforcement ensure the working pressure
4.Hose ends can be galvanized.
1.Our Elbow products series mainly including carbon steel ELBOWS,high wear resistant elbows,and other material upon your request.
2.A wide range of specifications for you.OEM service available .
3.quality certification of ISO 9001:2000.
1.Good corrosion behaviour and high absorbency
2.Standard-colour orange
3.Heat resistance up to 60° - 70° C
4.Low temperature resistance up to -40°C elastic
5.Elongation at break 400 - 550 % depending on sponge type
6.Tensile strength: 0, 15 - 1, 2 N/mm² depending on sponge type
7.Environmentally compatible
7.Concrete pump Flange
All products
Product Categories : Placing Boom Machines
